 |
2/4 |  |
MGI JETVARNISH 3D EVOLUTION
MGI JETVARNISH 3D EVOLUTION
Popis
Parciálne UV lakovanie / horná ražba pre 2D/3D efekty
Premení obyčajné tlačené materiály na pozoruhodné a pútavé výtlačky
V kombinácii s metalickou fóliou vytvára oslnivé efekty tak pri digitálnych, ako aj pri ofsetových výtlačkoch
Dokonalá sútlač vďaka revolučnému skeneru AIS SmartScanner
Pre odlíšenie a pridanú hodnotu
Kód produktu: MGI JETVARNISH 3D EVOLUTION
Cena na dotaz
-
Pre odlíšenie a pridanú hodnotu
Ak chcete odlíšiť a aktualizovať svoje služby, zvoľte si model MGI JETvarnish 3D Evolution ako ideálne riešenie pre poskytovateľov digitálnej a ofsetovej tlače. Premeňte obyčajné tlačené materiály na pozoruhodné a pútavé výtlačky prostredníctvom parciálnej povrchovej úpravy digitálnych a ofsetových výtlačkov, zvýraznenia definovaných oblastí alebo pridávania 3D efektov pomocou nášho zariadenia MGI JETvarnish 3D Evolution pre digitálne UV zušľachtenie. A vďaka kombinácii s inline modulom pre horúcu ražbu dosiahnete ešte úžasnejšiu povrchovú úpravu.
Printing technology Exclusive MGI inkjet engine technology
Drop-on-Demand (DoD) inkjet application
Piezoelectric print heads in single pass printingCoating thicknesses Depending on the print file and substrate used, the coating
thickness can vary from a traditional flat spot UV coating
of 3** μm up to 232 μm for 3D raised texture effects and a
tactile finish.Production speed Up to 3,123 ISO B2 sheets per hour in all versions
The version Evo 75 can reach up to 4,200* ISO B2 sheets per
hour (in landscape) and up to 2,291 ISO B1 sheets per hourRegistration SmartScanner coupled with Artificial Intelligence (AIS) for a
real-time fully automated sheet-to-sheet registration process
No crop marks requiredFormats Min: 42 x 29.7 cm
Max: 52 x 120 mm
75 x 120 mmPrintable areas Max: 51 cm / 74 cm Substrate thickness Min: 135 gsm and not less than 150 μm before
printing & lamination
Max: 800 gsm and not more than 800 μm before
printing & lamination ***Substrates Enhancement on most** matte or glossy laminated surfaces,
with or without aqueous coating, layered paper, plastic,
PVC and other coated materials. The used substrate needs
to be either coated or laminated. Otherwise the media will
absorb the varnish and the desired effect might be lostVarnish on toner Spot 3D coat directly onto most** digital prints UV coatings and capacity 1 coating tank for both 2D & 3D applications
One high capacity tank of 18 litres
“On-the-fly” tank changeover possible during production
without any interruption and no wasteAutomatic feeder High capacity feeder for paper stacks of up to 60 cm height
for 75 x 120 cm sheets ***
Approximately 4,000 sheets at 135 gsmPallet stacker Supports sheets of up to 75 x 120 cm size on pallet packaging Paper path 100% flat paper path
Vacuum feed system
Air feed system
Automatic double sheet detectionFront end system Intuitive touchscreen software management suite controlled
by a 27’’ monitor
Job cost calculator, image editor, queue manager and reprint,
camera and print head settings and reprint, dedicated
controller for equipment settings and technical data
Ethernet connection 10/100/1000 BT in RJ 45In-line UV dryer “On-the-fly” drying & curing via integrated UV lamps Maintenance & remote technical support Automated inkjet head cleaning and wiping
Daily maintenance completed in less than 10 min
Mainly automated procedures
From cold start to production in less than 15 min
Remote troubleshooting & support via included web video
camera (high-speed internet connection required)Operator panel Integrated user-friendly LCD touchscreen Product Specifications - iFOIL-L Production speed Up to 2,300 B2 landscape sheets per hour Formats Up to 75 x 120 cm Hot foil stamping area Max: 74 x 119 cm Substrate thickness Min: 150 μm
Max: 600 μm (standard), 800 μm (optional)Foil rolls Max. roll diameter and length: approx. 30 cm and from
400 to 2,000 meters of film
Up to 5 simultaneous film rolls on the same axis
(with a minimum of 10 cm per roll)
2 cores available Change for: 1 inch as standard and
3 inches as optionDry air Requires air without oil at 6 bar (87 psi) & 24 m3/h (14 cfm) Product Specifications - MGI JETVARNISH 3D EVOLUTION + IFOIL-L Dimensions (L x W x H) Up to 12.72 x 1.86 x 1.84 meter (Evo 75 full options) Weight Approx. 4,524 kg Electrical requirements 40 kW (63 A) at 400 Volts - 50/60 Hz + 20 kW (32 A) at
400 Volts - 50/60 HzTemperature 18 to 30°C Relative humidity between 30 and 50% (no condensation) Options Corona1/2 substrates
treatment moduleIn-line system to optimise varnish adhesion on complex
printed substratesVariable Data Printing
(VDP)– Full variable data (text, graphic, image) for both
2D/3D spot coating and hot foiling areas
– Integrated barcode (1D/2D) reader system & controller
– Raster Image Processor (RIP) as an option* With the 75cm/Evo kit.
** Confirm substrate/toner/metallic film compatibility with MGI.
*** With optional pallet feeder and stacker. Corona Surface Treatment Option might affect the max. thickness of media, which can be used on the MGI JETvarnish 3D EVO. Please get in touch with Konica Minolta/ MGI for any further details and an exact Validation- The support and availability of the listed specifications and functionalities varies depending on applications as well as system configurations.
- The stated life expectancy of each consumable is based on specific operating conditions such as page coverage for a particular page size. The actual life of each consumable will vary depending on use and other printing variables including page coverage, page size, media type, continuous or intermittent printing, ambient temperature and humidity.
- Some of the product illustrations contain optional accessories.
- Specifications and accessories are based on the information available at the time of printing and are subject to change without notice.
- Konica Minolta does not warrant that any prices or specifications mentioned will be error-free.
- All brand and product names may be registered trademarks or trademarks of their respective holders and are hereby acknowledged.
- The support and availability of the listed specifications and functionalities varies depending on operating systems, applications, network protocols as well as network and system configurations.
- Some of the product illustrations contain optional accessories.
- Specifications and accessories are based on the information available at the time of printing and are subject to change without notice.
- Konica Minolta does not warrant that all specifications mentioned will be error-free.
- Microsoft, Windows and the Windows logo are trademarks, or registered trademarks, of Microsoft Corporation in the United States and/or other countries.
- All other brand and product names may be registered trademarks or trademarks of their respective holders and are hereby acknowledged.
-
KonicaMinolta
|
2/4 | |
Zdielajte tento produkt
Telefón : +421 2 434 155 94, +421 905 759 028
Adresa : Stachanovská 43, 821 05 Bratislava
E-Mail : reficier@reficier.sk
Adresa : Stachanovská 43, 821 05 Bratislava
E-Mail : reficier@reficier.sk
Reficier JTL s.r.o.
Stachanovská 43,
821 05 Bratislava
Stachanovská 43,
821 05 Bratislava
Tel. & Email:
© Všetky práva vyhradené - www.reficier.sk
Naspäť
Nevyhnutné cookiesAnalytické cookiesMarketingové cookies